Some notes for passive fire protection when applying fireproofing epoxy paint
Before applying, it is necessary to prepare the surface carefully, the surface must be clean and free of impurities. This stage is very important because it directly affects the quality of the work surface after painting.
If a high pressure spray method is applied, the cleanliness level must be at least medium level according to SSPC and NACE standards.
For antirust primed steel surfaces, the surface must be clean, dry and undamaged.
The temperature of the paint film after mixing must be at least 10 degrees Celsius, if it is lower, more solvents must be mixed to ensure the paint has the right viscosity. However, if too much solvent is mixed, it will reduce the fire resistance and slow down the curing time of the paint film.

Fireproofing epoxy paint with excellent properties, providing high efficiency in preventing fire spread. However, you should also pay attention to some problems when applying fireproof paint to maximize the quality of epoxy paint.
(passive fire protection system )